Rabu, 11 Juli 2018

Pengambilan Sample Asbes

The use of proper respiratory protection is advisable. When applicable, a plastic drop cloth should also be used. 

1. Locate the sample location and suspected material.

2. Put on the enclosed plastic gloves to avoid contact between your skin and the sample.

3. Completely wet the sample location using a spray bottle with a soap and water solution (one teaspoon of soap per quart of water). The sample location should be kept wet throughout the sampling procedure to prevent the release of airborne fibers.

4. Collect the sample using a razor knife, chisel or another tool capable of securing a sample of the entire matrix. (example: the underlying scratch coat beneath popcorn ceiling, pipe insulation and mastic on seams, vinyl flooring including any additional layers of vinyl and/or mastic.)

5. Place the sample in one of the enclosed sample bags and seal.

6. Completely fill out the information form. (analysis can not be conducted unless you submit all the information requested.)





Pemeriksaan langsung dilapangan dapat menggunakan alat  asbestoprobe. silakan KLIK  http://www.asbestoprobe.com

Tidak ada komentar: